Shenzhen plastic machine

news

Shenzhen eternal Sheng Machinery Manufacturing Co., Ltd.

Contact: Qu Yang (Deputy General Manager)

Phone: 0755-84817776

Fax: 0755-84808776

Mailbox: yongheng@szyongheng.cn

Address: Shenzhen Longgang city Longgang District South Second Industrial Zone seventh

Web site: www.yonghengsz.com

Know how to solve the common malfunction of the advertisement sucking machine

Your current position: home >> News >> company news

Know how to solve the common malfunction of the advertisement sucking machine

Release date:2017-10-25 Author: Click:

There are many areas that are mainly used in advertising industry, and the price of advertising equipment will also be different because of the variety and form of advertising Blister.


The common troubleshooting method of advertising suction machine is:


First, the machine does not start: the input wire is inaccessible, the power line is inverse, and the voltage is not enough.

Two. The temperature measurement is inaccurate: thermocouple, temperature control instrument. Incorrect installation and damage.

Three, the work vacuum does not come: the air road is not accessible, the hand valve or the solenoid valve is not closed, the vacuum pump motor belt is loose and the vacuum table is damaged.

Four, total power switch tripping: heating box top input wire leakage, distribution box leakage, external wire on equipment, electric motor leakage and so on.

Five, the suction film is not in place: vacuum degree is not enough, leakage is not enough, the temperature is not enough, the film is too thin, the workpiece is pasted with other materials, the depth of the workpiece is deeper than that of the membrane, the suction time is too short, the film is not pulled up, and the workpiece distance is too close.

Six, the surface of the work piece is broken and not smooth or the corner can not be wrapped up: the film is not straight, the quality of the film is not good, the workpiece is not well polished, the glue is sprayed too much, and the touch plate of the workpiece is too low.

Seven, the plastic suction machine does not pull down when the film is pulled down: whether the solenoid valve or the hand valve is open.

Eight, suck the phenomenon: the temperature is too high, the heating time is too long, the film quality is not good, no heating.


Advertising sucking machine


Be careful:


  When choosing a (PVC) film, all the technical data must be provided by the manufacturer. Please select (PVC) special binder, and we must have all the data. According to the above data, we can set the reasonable data needed to get the desired quality and economic benefits.

  The above content is by yonghengsheng net plastic absorbing machine Xiaobian collected on "advertising plastic absorbing machine common fault problem solving related content method"! Shenzhen everlasting Machinery Manufacturing Co., Ltd. has been committed to research and development for 16 years, providing Shenzhen blister machine, Shenzhen blister machine, Shenzhen vacuum plastic suction machine, Shenzhen thick film suction machine, Shenzhen plastic suction molding machine, Shenzhen hot plastic molding machine, blister machine hotline: 0755-84817776


Related tags:Advertisingsuckingmachine

Recently browse:

share