Shenzhen plastic machine


Shenzhen eternal Sheng Machinery Manufacturing Co., Ltd.

Contact: Qu Yang (Deputy General Manager)

Phone: 0755-84817776

Fax: 0755-84808776


Address: Shenzhen Longgang city Longgang District South Second Industrial Zone seventh

Web site:

Elimination of common faults in Shenzhen plastic suction machine

Your current position: home >> News >> technical knowledge

Elimination of common faults in Shenzhen plastic suction machine

Release date:2017-12-18 Author: Click:

The most common use of products include: Shenzhen electric appliance plastic machine toy plastic packaging, daily plastic packaging, sports goods, plastic packaging, plastic packaging accessories, stationery, plastic packaging, automotive supplies, electronic products Blister packaging, blister packaging, blister machine, plastic food packaging, plastic packaging, cosmetics, plastic bags and other computer peripherals.

The main structure is made of plastic machine feeding, upper and lower furnace gate, pull material, adjustable size, lower die plate, the gate, the thick plastic machine mould, knife, slice, put the tablets and vacuum equipment; and then use a pneumatic device as the main power supply, at the same time the pull, delivery is the use of electricity, reducer, relay, time relay, limit switches and other electronic components of the automation control system.

The blister machine and injection molding machine are different. They are used for control system requirements. They need to ensure easy operation, high accuracy in mechanical action and temperature control, and short production time.

One, Shenzhen suction machine machine does not start: the input wire is not accessible, the power line is connected, and the voltage is not enough.

Two, the temperature measurement is inaccurate: thermocouple, temperature control instrument. Whether the installation is incorrect and damaged.

Three, the vacuum equipment of Shenzhen plastic suction machine is not up: the air suction way of the suction molding machine is blocked, the hand valve or solenoid valve is not closed, the belt of the vacuum pump motor is loose, and the vacuum gauge is damaged.

Four, total power switch tripping: heating box top input wire leakage, distribution box leakage, external wire on equipment, electric motor leakage and so on.

Five, the suction film is not in place: vacuum degree is not enough, leakage is not enough, the temperature is not enough, the film is too thin, the workpiece is pasted with other materials, the depth of the workpiece is deeper than that of the membrane, the suction time is too short, the film is not pulled up, and the workpiece distance is too close.

Six, the surface of the work piece is broken and not smooth or the corner can not be wrapped up: the film is not straight, the quality of the film is not good, the workpiece is not well polished, the glue is sprayed too much, and the touch plate of the workpiece is too low.

Seven, the Shenzhen plastic suction machine does not pull down when the film is sucked down: whether the solenoid valve or the hand valve is opened.

Eight. The phenomenon: the temperature is too high, the heating time is too long, the quality of the film is not good, and the temperature is not added.

Related tags:Shenzhensuctionmachine

Recently browse: