Shenzhen eternal Sheng Machinery Manufacturing Co., Ltd.
Contact: Qu Yang (Deputy General Manager)
Phone: 0755-84817776
Fax: 0755-84808776
Mailbox: yongheng@szyongheng.cn
Address: Shenzhen Longgang city Longgang District South Second Industrial Zone seventh
Web site: www.yonghengsz.com
Uses: Automatic plastic machine can be all kinds of film (PP, PET, APET, PETG, PVC, PS) plastic into different shapes plastic cover. Such as toys, hardware, food, electronics, medicines and other forms of dense packaging, and can produce three-dimensional relief patterns, plastic ceilings, siding, pie boxes, automotive materials and health equipment, such as the formation of a beautiful liner or shell packaging.
Features:
1, The machine automatic plastic machine drive using frequency control, can be set to different speeds or lengths, more efficient and accurate;
2, in line with the various shapes of molds, vacuum forming displacement factors are different, the machine has a primary and secondary vacuum displacement molding mode, the finished product to meet the required requirements;
3, demoulding equipped with shock mode, top mold repeat, available to choose to ensure that the product is not deformed;
4, electric furnace points on the furnace vertical control, the use of constant pressure controller grouping independent control, the temperature is more uniform, saving more than 40% of the traditional machine power;
5, the gate adjustment using electric motor before and after the drive, feeding automatic design, easy to operate;
6, the mold plate can be independent points rise, decline, adjust the level with different high and low mold, the fastest speed of production;
7, The machine is equipped with setting counting alarm device, suitable for each batch of film or film production statistics;
8, Built-in water cooling and rapid spray, speed up the molding speed.
specification | Model YH-720 |
Molding length | 300-1220mm/11-48inch |
Forming width | 410-710mm/16-28inch |
Forming height | 200mm/7inch |
working frequency | 220-600Times / hours |
Vacuum pump (motor) | 3KW 4HP |
Control form | Frequency Control |
Furnace control method | 60 groups of independent control |
The maximum stroke of the bottom mold | 320mm |
using electric | AC380V/220V 50HZ |
Actual power consumption | 12-20KW |
Mechanical Dimensions | L7350mm×W1900mm×H2600mm |
Mechanical weight | approximately4200KG |
Need to be equipped with air pump | 15HP |